Photogrammetry step 3 – masking from model is published

I have just finished Photogrammetry step 3 – masking from model. The result using the standard Workflow in Metashape can be seen in the left picture bellow. There is a problem with some unwanted artefacts. Agisofts Metashape also have a feature that uses depth maps. It was this method that was used in Photogrammetry step 2 – A 3D model. But areas such as grass can be problematic as can be seen in the right picture below where there is some holes in the grass/ground.
The result from using the masking technique described in part 3 – masking from model can be seen in the model below.
Tutorial by Jörgen Hellberg on Sketchfab
Link to the model at Sketchfab: https://skfb.ly/6OANG